SPECIAL FUNCTIONS 

• Fast PC-based navigation.
• NEW Intuitive navigation system with direct access to functions.
• Exclusive patented ROVER AUTODISCOVERY system: automatically detects and selects
• analog and digital TV signals COFDM / QAM both in measurement mode and spectrum.
• Automatically identifies all signals with SAT, TV and CATV digital modulation.
• Automatic assistant: analysis of signal quality, storage of channel scanning.
• Barscan TV and CATV function from 10 to 100 channels in a single screen.
• Real-time graph of the Buzzer and the Margin of Noise for the micro-interruptions of digital signals.
• Optical input (opc.).
• WI-FI analyzer (optional).
• HEVC H265 decoder.
• SATELLITE: DiSEqC, SCR and dCSS functions, SAT FINDER and SAT EXPERT.
• Custom channel plans: 25 (199 channels per floor), programmable TV, SAT (or combined TV / SAT) from
• PC or local keyboard.
• Loggers: TV, SAT and combined with stop & go function.
• SAT Memory Plan: More than 2,000 pre-stored transponders for the world Satellite.
• LAN cable tester.
• Tester for IP cameras.
• IPTV analyzer.

SPECIFICATIONS: MEASURES, SPECTRUM ANALYSIS and IMAGES

• Frequency range: 30-2700 MHz.
• Frequency resolution: TV and CATV: 25 KHz; SAT: 5 MHz.
• Power range measurement: from 5 to 120 dBμV.
• Digital measurements: digital power, MER (from 36 to 40 dB max depending on the modulation), BER, PER,
• LDPC, BCH, Margin of Noise, MER versus CARRIER.
• Measurement resolution: 0.1 dB.
• Level measurement accuracy: 1 typical dB. (2dB maximum)
• Bandwidth of the resolution filter: TV and CATV: 100 KHz @ -3 dB; SAT: 1 MHz at -3 dB.
• Constellation: for TV / CATV and SAT signals.
• Spectrum: Fast spectrum, Max Hold and spectrum storage with time comparison function real.
• Net-ID on board: Net-ID, NID, TSID, LCN, SAT orbit position.
• Echoes, Pre-echoes, Micro-echoes: Real-time representation.
• Quality: Automatic digital quality test: PASSATO-MARGINAL-BALL.
• Digital images: MPEG2-4 SD and HD, HEVC images with list of programs, PID audio video, LCN, Bitrate video all on one screen.
• Audio: AAC, DOLBY AC3 DD +.

OPTICAL MEASURES (opc.)

• Maximum input power: 5 dBm.
• SC input connector.
• Automatic calculation of losses.
• Wavelengths (nm): 1310, 1490, 1550.
• Interval: -25 to +6 dBm.
• Resolution: 0.1 dB.
• Accuracy: + / - 0.5 dB.
• Optical to RF conversion: SAT, TV and CATV measurements and spectrum.

GENERAL SPECIFICATIONS

• TFT TOUCH display of 7 ”: 16: 9 in high resolution and high brightness. Industrial capacitive display.
• DC voltage at the RF input: 5 – 12 – 18 – 24 V, DC commands DiSEqC, SCR and dCSS.
• PC interface: USB-B.
• Front Panel: Alphanumeric Keypad + Multifunction Encoder.
• Energy saving: TFT backlight timer, brightness adjustment.
• PC Management: WEB Browser (no particular SW is required).
• Power supply: 220 VAC certified external power supply – 12 Vdc 3A.
• Battery: Integrated lithium polymers from 2 to 4 hours in duration (depending on function) and BATTERY function
• TEST.
• Battery door: removable for quick and easy replacement without assistance
• Weight: only 1.8 kg.
• Dimensions: H 27.0 x L 15.5 x D 4.0 cm (meter only).
• Aluminum and steel case.
• Bag with padding and handle / shoulder strap for transport and use.

OPTIONS

• DAB and DAB + (HW).
• Optical input (HW).
• WI-FI analyzer (HW).
• FM radio (HW).
• IPTV (SW).

INCLUDED

• PC-based management SW.
• HEVC images.
• TV and SAT measurements.
• LAN tester.
• Tester for IP cameras.
• Remote control LAN