|  Aerial Industries Home
FRACARRO Fibre Optic Transmitter MBJ Series +5dBm

FRACARRO Fibre Optic Transmitter MBJ Series +5dBm


In Stock



Three-input OPT-MBJ optical transmitter for distribution of band 3, UHF and full IF-IF signals on a single fibre. Laser optical output level of 5dBm, wavelength 1550nm. (dimensions 135x82x39mm)

Technical Information

  • OPT 3US TX: Up to 20dB of manageable optical attenuation (division ratio greater than 1:32 over P.O.N. distribution) when TX is used together with OPT-RX receiver.
  • A.B.L.A. Technology: this exclusive FRACARRO system maintains the correct optical level via special independent electronic circuits, even if the RF input level of each input changes
  • Dedicated A.B.L.A. status LEDs
  • Separate amplification: the new OPT-MBJ optical transmitter works with "separate amplification" and independent handling of the RF input signals
  • Protective shell: OPT-MBJ optical transmitters and receivers are protected by an innovative protective shell made of flame retardant ABS material (Class V0)
  • Optical output level stabilisation even for high variations of the RF input signal
  • Monitor output: RF output connector for monitoring the RF signal without disconnecting the service from the distribution network
  • Suitable for standard DIN rail mounting (with quick release)
  • Low power consumption
  • Power supply status LED
  • Quick and easy installation (Plug&Play)
  • High shielding against electromagnetic interference
  • Standard SC/APC connectors
Code   270657
Input RF   3 (3, UHF, IF-IF)
Optical Output   1 SC/APC
SAT inputs
Bandwidth MHz 950-2150
SAT Connectors   F Female
Output level SAT dBµV 60-85 @TP
Return loss dB 8
Input TV
Connectors   F Female
Input level dBµV 60-85 @MUX
Frequency band MHz 174-230, 470-790
Return loss dB 8
TEST output
Connectors   F Female
Frequency band MHz 174-230 / 470-790 / 950-2150
Attenuation connectors dB 59 (VHF), 70 (UHF, SAT)
Optical output
Wavelength nm 1550
Optical power dBm 5
Optical return loss dB >30
Safety class   1M
Power supply voltage Vac/Hz 184-264 / 50-60
Current consumption W 5.5
LED   Blue on / Signal in the correct A.B.L.A. range, remote feed active
Working temperature °C From -10 to +55
Conformity   CEI EN 50083-2 EN60065
Dimensions and packaging
Pcs   1
EAN code   8016978103676
Packaging dimensions mm 176x110x50
Product dimensions mm 135x82x39
Packaging weight Kg 0.345

Product Code: OPT 3US TX

Category: Fibre Optic Solutions

Brand: Fracarro

Bulk Qty: 1

Click Image to Enlarge