FRACARRO Fibre Optic Transmitter MBJ Series +9dBm
FRACARRO OPT T+S TX PLUS
OPT-MBJ optical transmitter with a wide band input for the distribution of TV + SAT signals on a single fibre. Optical output level of 9dBm with laser, wavelength 1550nm (dimensions 135x82x39mm)
Technical Information
- OPT T+S TX PLUS: Up to 24dB of manageable optical attenuation (division ratio greater than 1:64 over P.O.N. distribution) when TX is used together with OPT-RX receiver
- A.B.L.A. Technology: this exclusive FRACARRO system maintains the correct optical level via special independent electronic circuits, even if the RF input level of each input changes
- Dedicated A.B.L.A. status LEDs
- Separate amplification: the new OPT-MBJ optical transmitter works with "separate amplification" and independent handling of the RF input signals
- Protective shell: OPT-MBJ optical transmitters and receivers are protected by an innovative protective shell made of flame retardant ABS material (Class V0)
- Optical output level stabilisation even for high variations of the RF input signal
- Monitor output: RF output connector for monitoring the RF signal without disconnecting the service from the distribution network
- Broadband TV / SAT
- Suitable for standard DIN rail mounting (with quick release)
- Low power consumption
- Power supply status LED
- Quick and easy installation (Plug&Play)
- High shielding against electromagnetic interference
- Standard SC/APC connectors
| OPT T+S TX PLUS | ||
| Code | 270656 | |
| Input RF | 1 (TV+SAT) | |
| Optical Output | 1 SC/APC | |
| SAT inputs | ||
|---|---|---|
| Bandwidth | MHz | 950-2150 |
| SAT Connectors | F Female | |
| Output level SAT | dBµV | 60-85 @TP |
| Return loss | dB | 8 |
| Input TV | ||
| Connectors | F Female | |
| Input level | dBµV | 60-85 @MUX |
| Frequency band | MHz | 88-862 |
| Return loss | dB | 8 |
| TEST output | ||
| Connectors | F Female | |
| Frequency band | MHz | 88-862 / 950-2150 |
| Attenuation connectors | dB | 81 |
| Optical output | ||
| Wavelength | nm | 1550 |
| Optical power | dBm | 9 |
| Optical return loss | dB | >30 |
| Safety class | 1M | |
| Features | ||
| Power supply voltage | Vac/Hz | 184-264 / 50-60 |
| Current consumption | W | 4.5 |
| LED | Blue on / Signal in the correct A.B.L.A. range, remote feed active | |
| Working temperature | °C | From -10 to +55 |
| Conformity | CEI EN 50083-2 EN60065 | |
| Dimensions and packaging | ||
| Pcs | 1 | |
| EAN code | 8016978103706 | |
| Packaging dimensions | mm | 176x110x50 |
| Product dimensions | mm | 135x82x39 |
| Packaging weight | Kg | 0.335 |
Product Code: OPT T+S TX PLUS
Category: Fibre Optic Solutions
Bulk Qty: 1
Click Image to Enlarge
